24 Geg 2024 ID: 475110
URL Copied!

25YM HONDA CRF450R

25YM HONDA CRF450R

New Model: Improved cornering stability especially on rough circuit conditions – with no loss of steering agility – is the outcome of development for the HRC-inspired 25YM CRF450R. A 70% new mainframe, alongside a variety of cycle part updates plus completely new Showa suspension and two-piston Nissin front brake caliper are the main changes driving the performance upgrade. The engine builds increased drive, traction and power past peak via revised intake/exhaust and PGM-FI settings. Specification includes 3-level Honda Selectable Torque Control (HSTC), Launch Control and Engine Mode Select Button (EMSB). New plastics and updated CRF family graphics signify the model change while a Honda wing on the front mudguard is the finishing touch.

 

A new CRF450RWE will also be available, featuring parts that further enhance its performance and appeal.

 

Contents:

1 Introduction

2 Model overview

3 Key features

4 Technical specifications

 

1. Introduction 

The Honda CRF450R has been the benchmark motocrosser since its introduction in 2002. Its package has always aimed to offer its rider – whether amateur enthusiast or pro-racer – total control through balance and agility. Plus, of course, it’s built with the quality, durability and longevity that Honda has long been famed for. 

 

And it’s a race bike that has constantly evolved. In 17YM, Europe’s favourite open-class MX machine was given a ground-up redesign, with completely new chassis and a major top-end power boost from a brand-new engine. Standard-fit electric start was a convenient addition in 18YM and, for 19YM, an HRC-developed cylinder head upped power and torque considerably; HRC launch control was also added. In 20YM the CRF450R gained Honda Selectable Torque Control (HSTC).

 

For 21YM, aside from the wheels and the fundamental engine architecture, the CRF450R was effectively a totally new bike, drawing heavily on developments from the 2019 MXGP championship winning CRF450RW. Detail refinements followed for 22YM but the 23YM machine jumped out of the gate with a host of updates to the engine and chassis, improving and smoothing low-down torque delivery and building front-end grip.

 

Development of the CRF450R has always gone hand in hand with the needs of HRC’s MXGP factory riders. None has been so influential as five-time world champion #243 Tim Gajser, as the Slovenian looks to add to his trophy-haul on what is, effectively, a brand-new 25YM CRF450R to race.

 

The 25YM CRF450R aims at making going fast, really fast, easier especially on a rough track, adding upgraded stability to its turning performance with increased throttle control of the engine.

  

As always, the CRF450R remains to its core the HRC racer that it is possible to buy.

 

2. Model Overview 

Enhanced stability and control – over the roughest track conditions – were goals for the 25YM CRF450R. The aluminium twin-spar frame is 70% new, with a completely revised rigidity balance alongside new subframe attachment points, top/bottom yokes and stem, front wheel axle/clamp and Pro-Link ratio.

 

The Showa suspension has been completely remade and aims to deliver consistent damping and suspension reaction from bottom to top stroke. Both 49mm front fork and rear shock feature new settings; the shock is also now much easier to remove. HRC provided the blueprint for the new front brake caliper; it features new machining for the body, plus new pistons and seal grooves to resist heat fade over race distance.

 

For enhanced throttle control, drive and power past peak output the 4 valve Unicam engine employs a straighter path for airflow on the intake side, an extended exhaust downpipe and revised PGM-FI settings. The muffler meets new FIM noise regulations.

 

Crisply redesigned side covers, radiator shrouds and CRF family graphics mark out the 25YM CRF450R, alongside a Honda Wing on the front mudguard.

 

 

3. Key Features

 

3.1 Chassis

 

  • 70% redesign of aluminium twin-spar frame improves overall stability
  • New top/bottom yokes and front wheel axle clamp and spindle
  • Brand new Showa front/rear suspension delivers smooth, consistent damping control 
  • Revised Pro-Link shock linkage structure and ratio
  • New HRC-design front brake caliper resists heat fade

 

The 25YM CRF450R – well established as a fast-steering, lightweight tool – pushes handling ability further with increased straight line and cornering stability, bump absorption and feel for front and rear grip.

 

The twin-spar aluminium main frame features a 70% redesign, with the aim of enhanced overall chassis stability on the roughest of track conditions. A redesigned front down tube, stiffener spars and side gusset stiffener combine with new pivot plates, upper shock mount and tension bracket to generate 8% more torsional rigidity - improving stability. The torsional/lateral rigidity ratio is 5% greater, elevating cornering performance.

 

Vertical torsional rigidity increases 4%, suppressing deformation and high-speed instability; the rear subframe now mounts on the high-rigidity pivot plates (rather than the frame spars). This change reduces the transmission of energy (and subsequent movement) from the back of the machine to the rear head pipe section by 27%.

 

A great deal of work has gone into the top/bottom and steering stem to get a more consistent and stable suspension stroke. Alongside revised fork outer tubes and new front axle bolt, the 25YM setup is more rigid, equalling a reduction of 6% in rigidity change during the stroke. The 585.2mm aluminium swingarm is unchanged.

 

Rake and trail are set at 27°19’/115mm with 1,483mm wheelbase and 333mm ground clearance. Dry weight is 108kg (113kg wet) with a 48.7/51.3% front/rear balance (wet).

 

Even more development has gone into the suspension. The aim has been to make fork stroke smoother, by removing any obstructions, while adding appropriate friction – 200% more friction force – throughout the entire stroke, with consistent damping force from top to bottom.

 

The Showa 49mm USD coil spring forks are effectively brand new with each component part – from outer rigidity to all internals – remade to deliver enhanced control from the initial movement all the way through. It employs a 310mm stroke and the oil specification is also new, to enhance low-speed damping. There are 16 adjustment positions for both of rebound and compression; all settings have been revised for 25YM.

 

Matching the forks the Showa rear shock has been remade to deliver consistent, uniform control anywhere in the stroke, with friction reduced in the bottom. There are 17 adjustment positions for rebound and 3.5 turns for high and 13 adjustment positions for low-speed compression, all revised for 25YM.A revised Pro-Link structure is 11% more rigid, with ratio and axle travel optimised to deliver smoother bump control.

 

The 25YM CRF450R has also been designed to make shock removal/replacement quicker, with only four parts needing removal, cutting time in half.

 

Drawing from parts employed by HRC’s factory race bikes the re-machined, two piston front brake caliper uses new pistons and piston seal grooves. The new design reduces lever play by 57% when caliper temperature is high, while the caliper itself reduces rigidity change when hot by 25%, improving brake lever linearity and reducing rider fatigue. The 260mm wave-pattern disc is unchanged; a single-piston rear caliper is matched to a 240mm wave-pattern disc.

 

DID aluminium rims, with directly attached spoke pattern layout are finished in black; the front is a 21 x 1.6in, the rear a 19 x 2.15in. Dunlop’s MX33F/MX33 soft-terrain tyres are fitted as standard equipment.

 

Minimal bodywork aids rider movement around the machine. The shrouds and side covers have been updated for 25YM, using the consistent CRF design philosophy focussed around lightweight/mass centralisation/ergonomics. A flat knee trajectory, front to back of the machine, has been maintained. New CRF family graphics denote the model change, and a Honda Wing makes an appearance on the front mudguard. The titanium fuel tank holds 6.3L.

 

Standard-fit, lightweight Renthal Fatbar flex for optimal comfort; the top yoke features two handlebar-holder locations for moving the handlebar rearward and forward by 26mm. When the holder is turned 180°, the handlebar can be moved an additional 10mm from the base position, resulting in four unique riding positions.

 

3.2 Engine

 

  • More direct airflow intake route improves throttle feel in tight turns
  • Extended exhaust downpipe builds mid-range range control
  • Traction drive improved plus power up past peak output

 

Improved throttle feel and torque in the mid-range and extra power past peak are the result of HRC’s development of the 25YM 449.7cc four-valve Unicam engine – to make getting out of a tight corner much quicker and easier – as well as driving 3rd gear harder, and for longer.

 

The airflow route – through intake, airbox, intake funnel and 44mm throttle body – is more direct than the previous design, reducing resistance and improving throttle control. In conjunction a new, extended header pipe builds more controllable character into the low- to mid-range zone. New settings for the PGM-FI match the engine’s new performance parameters. The exhaust muffler is constructed from heat-treated aluminium to better stand up to the rider’s boot; it meets the new FIM 109dB noise regulation.

 

Bore and stroke are set at 96 x 62.1mm with compression ratio of 13.5:1. A gear position sensor allows the use of three specific ignition maps for 1st and 2nd, 3rd and 4th, and 5th. An 8-plate hydraulic clutch gives outstanding control and feel at the lever as well as delivering consistent lever clearance under arduous riding conditions. It also reduces slippage at peak output.

 

Rock-solid reliability has always been a big factor in the CRF450R’s success and a 5-hole piston oil jet and dual 12mm drum scavenge pump manage all-important lubrication.

 

3.3 Electronics

 

  • Honda Selectable Torque Control (HSTC) with 3 riding modes (plus OFF)
  • HRC Launch Control offers 3 start options
  • Engine Mode Select Button (EMSB) features 3 maps to adjust output character
  • HRC Setting tool tailors Aggressive and Smooth modes

 

The HSTC works to minimise rear wheel spin (thus reducing wasted forward drive) and maximise traction. It doesn’t use a wheel speed sensor, and critically maintains feel at the throttle while managing power; ignition timing is retarded and the PGM-FI controlled when the rate of change of rpm is detected to have gone over a set amount.

 

Three Modes differ in drive management level for different riding conditions:

 

Mode 1 intervenes most lightly, and after the longest time ­– useful for reducing wheelspin

 

Mode 2 naturally offers a mid-point between 1 and 3 in terms of speed and strength of intervention and maintaining control in tight corners.

 

Mode 3 has the system intervene more quickly and strongly, and is therefore useful in more slippery, muddy conditions.

 

HSTC can also be switched off completely. When the engine is turned on, the system uses the last-selected setting.

 

The Launch Control also has 3 Modes: Mode 1 has a high rev limit, 2 (the factory setting) uses a middle point with 3 set low. There are 3 Modes available via the Engine Mode Select Button (EMSB) to alter engine character. Mode 1 is the factory setting, 2 smooth and 3 aggressive.

 

The Launch Control indicator, EFI warning, HSTC and EMSB mode button, and LED indicator are sited on the left handlebar. Pressing and holding the HSTC button for 0.5s will cycle the system to the next mode, with a green LED indication – 1 blink for Mode 1, 2 for Mode 2 and 3 for Mode 3 – to confirm selection.

 

CRF450RWE

 

For 25YM, a special CRF450RWE will also be available. Benefitting from all the model upgrades of the CRF450R, the CRF450RWE features additional parts that enhance both its performance and its appeal.

 

Built alongside the CRF450R in Kumamoto, the CRF450RWE features a Yoshimura muffler and TwinAir air filter to improve air flow management; exclusive ignition timings and unique start mode settings. A Hinson clutch basket with new clutch dampers and cover enhance both performance and wear resistance.

 

The intake/exhaust ports of RWE cylinder head are hand-finished by specialist craftspeople work in the Kumamoto factory to remove any small steps in the port created in the casting process. This makes air flow smoother and improves power delivery. The laser engraving “CRF WORKS EDITION” is added to the cylinder head to underline its special status.

 

The rear shock features a titanium coated rod for improved wear resistance and rear wheel control, paired to further upgraded front forks, which now feature a special dark Kashima coating on the outer tube and a titanium coating on the slide pipe for optimal wear resistance.

 

The CRF450RWE will also feature a striking metallic red engine head cover, black top and bottom bridges, a gold DID DM2 chain, Renthal bar grips, a Throttle Jockey seat, black DID-LTX wheel rims, a black anodised front axle holder as well as updated graphics and laser engraving on the wheel rims and suspension caps. The hand-operated compression adjuster knob on the top of the front suspension provides easier adjustment without the need for any tools.

 

4. Technical Specifications

 

ENGINE

 

Type

Liquid-cooled 4-stroke single cylinder uni-cam

Displacement

449.7cc

Bore ´ Stroke

96.0mm x 62.1mm

Compression Ratio

13.5:1

FUEL SYSTEM

 

Carburation

Fuel injection

Fuel Tank Capacity

6.3L

ELECTRICAL SYSTEM

 

Starter

Electric

DRIVETRAIN

 

Clutch Type

Wet type multi-plate

Transmission Type

Constant mesh, 5-speed, manual

Final Drive

Chain

FRAME

 

Type

Aluminium twin tube

CHASSIS

 

Dimensions (L´W´H)

2,183 x 827 x 1,265mm

Wheelbase

1,482mm

Caster Angle

27°19’

Trail

115mm

Seat Height

961mm

Ground Clearance

333mm

Weight

108kg (113kg wet) (CRF450RWE 108kg (113kg wet))

SUSPENSION

 

Type Front

Showa 49mm USD fork – 310mm stroke

Type Rear

Showa monoshock using Honda Pro-Link. 310mm Axle travel

WHEELS

 

Type Front

21 x 1.6in Aluminium, spoke nipple

Type Rear

19 x 2.15in Aluminium, spoke nipple

Tyres Front

80/100-21-51M Dunlop MX33F

Tyres Rear

120/80-19-63M Dunlop MX33

BRAKES

 

Front

Single 260mm disc

Rear

Single 240mm disc 

ADDITIONAL FEATURES

 

Electronics

HRC Launch Control

HSTC

 

All specifications are provisional and subject to change without notice.

64 Total Items
No media available
64 Related Images
Media Contacts
Matt McCabe Brown
Matt McCabe Brown
Honda Motor Europe
Motorcycle PR Events & Communications Manager