06 Nov 2018 ID: 155722

2019 HONDA CBR500R

2019 HONDA CBR500R

Model updates: Honda’s A2-compatible ‘pocket rocket’ gets an aggressive, aerodynamically-driven sports makeover, plus a racier riding position. The engine has more low-to-mid range power and torque, and is also now equipped with an assist/slipper clutch. New LCD instruments and LED indicators round out the updates.

 

Contents:

1 Introduction

2 Model overview

3 Key features

4 Accessories

5 Technical specifications

 

1. Introduction

 

 

Honda’s fully-faired CBR500R – launched in 2013 alongside the naked CB500F and adventure-styled CB500X – gives a genuine sporting energy to its fun-focussed twin-cylinder ‘light middleweight’ trio.

 

Suitable for riders looking to move up from a smaller machine, it instils the excitement of sports bike ownership into every ride yet also delivers sensible running costs, making it a great bike to both commute through the working week and enjoy at the weekend. It’s also found favour with experienced riders looking to downsize their machinery, while preserving the essence of enjoyable motorcycling.

 

In 2016 the CBR500R assumed sharper styling and LED lighting to go with upgrades to its front suspension; for 2019 it gets an even more aggressive makeover, with a new form and riding position that outlines a keener sporting intent. Its engine is stronger off the bottom and spins readily to the redline, delivering a thrilling howl in the process.

 

The CBR500R has always proved fast, frugal, affordable and fun. And for 2019 its spirit has not changed – more of the same, yes; and a little something extra.

 

 

2. Model Overview

 

Contrasting angles and shaping – between the very slim and more muscular – from the fairing nose to the seat unit outline the CBR500R’s new look. It’s an ergonomic design for the rider to use aggressively which also features improved aero management. Clip-on handlebars now mount below the revised top yoke and the riding position is canted further forward.

 

While its engine maintains the 35kW required for A2 licence holders, it now makes 4% more power and torque between 3-7,000rpm thanks to revisions to the inlet, exhaust and valve timing. It also now features an assist/slipper clutch.

 

New LCD instruments feature a Shift Up and Gear Position function and the indicators are now LED, to match the rest of the lighting. While the chassis remains essentially unchanged a new rear shock absorber delivers consistent damping performance and improved control.

 

 

3. Key Features

 

3.1 Styling & Chassis

 

  • Aggressive new lines with purposeful, dual LED headlights
  • Aerodynamically efficient and ergonomically comfortable
  • Re-sited clip-on handlebars give a sportier riding position
  • New LCD instrument display, with Gear Position and Shift Up indicators
  • LED indicators

 

For its 2019 evolution the CBR500R’s fully faired form is made more aggressive still with straight, wedge-like feature lines and extended lower fairings that emphasise a real sense of speed. The rider’s seat pad and seat unit – plus the upper and side fairings – have been narrowed to improve ergonomics and movement. Sharply- chiselled dual LED headlights stare menacingly ahead, and the addition of LED indicators now means all lighting is LED

 

The view forward, from the CBR500R’s cockpit, is pure sports. The handlebars now clip on beneath the sporty, redesigned top yoke and as a result the riding position is canted 8° further forward; the fairing is also set lower, to give the rider Total Control ­– the design philosophy behind the styling redesign, and a mantra for Honda’s super sports range since the 1992 arrival of the Fireblade.

 

New LCD instruments feature a Gear Position and Shift Up indicator; this is set to a default 8,750rpm but can be adjusted in 250rpm increments between 5-8,750rpm

 

The 35mm diameter steel diamond-tube mainframe is unchanged for 2019. It’s light and strong, with a tuned degree of yield that gives plenty of feedback to the rider as road surfaces change. The shape and position of the engine mounts, plus the frame’s rigidity balance also reduces vibration.

 

Wheelbase is 1410mm and rake and trail are set at 25.5°/102mm giving nimble, yet confidence-inspiring steering. Mass centralisation, with the engine in close proximity to the swingarm pivot point, delivers turning agility and optimum front/rear weight distribution ensures stability. Kerb weight is 192kg.

 

Seat height remains low at 785mm, making the CBR500R very easy to manage and its riding position comfortably accommodates riders of any height. Overall dimensions are 2080mm x 75mm x 1145mm, with 130mm ground clearance. The fuel tank holds 17.1L, including reserve and combined with the engine’s excellent fuel economy gives a range of 480km (over 260 miles).

 

The 41mm telescopic front fork, with 120mm stroke, delivers a compliant yet controlled ride and gives great feel for front tyre grip. A new single-tube rear shock absorber (as found on larger capacity sports bikes) replaces the double-tube design of the previous model; its large-diameter piston ensures excellent suspension response and temperature management. It has 9-stage spring preload adjustment and works through a rigid box-section steel swingarm, which now features pressed steel chain adjustment end-pieces. Final drive is via sealed 520 chain.

 

Lightweight, 17-inch cast aluminium wheels employ hollow cross-section Y-shaped spokes. Front wheel width is 3.5inch with a 120/70-ZR17 tyre, the rear 4.5inch with a 160/60-ZR17 tyre. A single front 320mm wavy disc and two-piston brake caliper is matched to a 240mm rear disc and single-piston caliper. ABS is fitted as standard.

 

The CBR500R will be available in the following colour options:

 

Matt Axis Grey Metallic

 

Grand Prix Red

 

Pearl Metalloid White

 

3.2 Engine

 

  • Lively twin cylinder power plant’s internal architecture mirrors that of the CBR1000RR
  • Revised inlet, exhaust and valve timing delivers 4% more mid-range power and torque
  • Sportier sound from new dual exit muffler
  • Assist/slipper clutch eases upshifts and manages downshifts

 

The CBR500R’s A2-licence friendly, 8-valve liquid-cooled parallel twin-cylinder layout offers a well-proportioned balance of physical size and willing, enjoyable power output, with an energetic, high-revving character and zappy top end. 

 

Already strong off the bottom, the target for 2019 development was faster acceleration through a boost in low-to-mid-range power and torque in the 3-7,000rpm range; the 4% improvement comes via altered valve timing – with ‘close’ timing accelerated by 5° – and lift increased 0.3mm to 7.8mm.

 

Feeding the PGM-FI fuel injection is now a more-or-less straight shot of airflow through the airbox and throttle bodies. The battery has been re-positioned further away (44.1mm versus 13.4mm) from the rear of the airbox intake duct to allow greater airflow; the exhaust muffler now features dual exit pipes, adding a sportier sounding edge to each pulse. Peak power of 35kW arrives at 8,500rpm, with 43Nm torque delivered at 7,000rpm.

 

Bore and stroke is set at 67mm x 66.8mm; the crankshaft pins are phased at 180° and a primary couple-balancer sits behind the cylinders, close to the bike’s centre of gravity. The primary and balancer gears use scissor gears, reducing noise. The crank counterweight is specifically shaped for couple-balance and its light weight allows the engine to spin freely, with reduced inertia.

 

Acting as a stressed member, the engine complements the frame’s rigidity with four frame hangers on the cylinder head. Internally the cylinder head uses roller rocker arms; shim-type valve adjustment allows them to be light, for lower valve-spring load and reduced friction.

 

A silent (SV Chain) cam chain has the surface of its pins treated with Vanadium, reducing friction with increased protection against wear. Inlet valve diameter is 26.0mm with exhaust valve diameter of 21.5mm.

 

The piston shape is based upon those used in the CBR1000RR Fireblade to reduce piston ‘noise’ at high rpm. Friction is reduced by the addition of striations on the piston skirt (a finish that increases surface area, introducing gaps in which oil can flow for better lubrication). As with the CBR1000RR, an AB 1 salt bath process, used after isonite nitriding, forms a protective oxidisation membrane.

 

The ‘triangle’ proportion of crankshaft, main shaft and countershaft is very similar to that of Honda’s four-cylinder RR engines and much of the internal structure and engineering is taken directly from the CBR1000RR.

 

The crankcase uses centrifugally cast thin-walled sleeves; their internal design reduces the ‘pumping’ losses that can occur with a 180° phased firing order. Using the same internal relief structure as that of the CBR1000RR, the oil pump features improved aeration performance, with reduced friction; a deep sump reduces oil movement under hard cornering and braking. Oil capacity is 3.2L.

 

A six-speed gearbox mirrors that of its RR cousin and uses the same gear change arm structure and link mechanism. New for 2019 an assist/slipper clutch enables lighter upshifts and smooths out any hard downshifts.

 

 

4. Accessories

 

A range of Genuine Honda Accessories are available for the CBR500R. They include:

 

35L top box

Rear carrier

Tank bag

Seat bag

Tall screen

Heated grips

12V Socket

Seat Cowl

Wheel Stripes

Tank Pad

 

 

5. Technical Specifications

 

ENGINE

 

Type

Liquid-cooled, parallel twin

Displacement

471cc

No of Valves per Cylinder

4

Bore & Stroke

67mm x 66.8mm

Compression Ratio

10.7:1

Max. Power Output

35kW @ 8600rpm

Max. Torque

43Nm @ 6500rpm

Oil Capacity

3.2L

FUEL SYSTEM

 

Carburation

PGM FI

Fuel Tank Capacity

17.1 litres

Fuel Consumption (WMTC)

29.4km/litre

ELECTRICAL SYSTEM

 

Battery Capacity

12V 7.4AH

ACG Output

25A/2000rpm

DRIVETRAIN

 

Clutch Type

Wet multiplate

Transmission Type

6 speed

Final Drive

Chain

FRAME

 

Type

Steel diamond

CHASSIS

 

Dimensions (L´W´H)

2080mm x 755mm x 1145mm

Wheelbase

1410mm

Caster Angle

25.5 degrees

Trail

102mm

Seat Height

785mm

Ground Clearance

130mm

Kerb Weight

192kg

SUSPENSION

 

Type Front

Conventional telescopic front forks, 41mm, pre-load adjustable

Type Rear

Prolink mono with 5-stage preload adjuster, steel square pipe swingarm

WHEELS

 

Type Front

Multi-spoke cast aluminium

Type Rear

Multi-spoke cast aluminium

Rim Size Front

17 x MT3.5

Rim Size Rear

17 x MT4.5

Tyres Front

120/70ZR – 17M/C

Tyres Rear

160/60ZR – 17M/C

BRAKES

 

ABS System Type

2-channel

Type Front

Single wavy disk, 320mm, 2 piston caliper

Type Rear

Single wavy disk, 240mm, 1 piston caliper

INSTRUMENTS & ELECTRICS

 

Instruments

Digital speedometer, digital bar graph tachometer, dual trip meters, digital fuel level gauge & fuel consumption gauge, digital clock, gear position indicator

Security System

HISS (Honda Intelligent Security System)

Headlight

Low 13W. Hi. 12.8W


All specifications are provisional and subject to change without notice.

** Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors

Media Contacts
Olivia Taylor
Olivia Taylor
Honda Motor Europe
PR Coordinator
50 Total Items
No media available
49 Related Images
1 Related Videos